• SolarJul
  • WebsiteBanner
  • HighriseBanner
  • iTopPlus656964190214
  • iTopPlus1176441937492
  • iTopPlus1459636757757
iTopPlus1144391016429

Low Voltage Capacitor
iTopPlus752713810970    iTopPlus1481803380385    iTopPlus796882167754    iTopPlus1523070315775


High reliability and complete working security are the main characteristics of TCC Series Capacitors. Reliability is guaranteed by the use of a special metallised dielectric and and by severe process controls. Security of the product is guaranteed by a series of protection devices:
Internal Overpressure Device: this device operates in case of internal short circuit by disconnection of the internal connections. It is necessary to allow at least 10 mm for the case expansion. Do not use rigid connections.
Discharge resistors: Internal discharge resistors are used for all capacitors of 55 mm and 65 mm diameter. External resistors are supplied for all capacitors of 75 mm, 85 mm, 100 mm, 116 mm and 136 mm diameter. The function of the discharge resistors is to reduce the voltage between terminals of the capacitor to levels prescribed in the following Specifications EN 60831/1-2 and IEC 831/1-2.

The TCC three-phase capacitor for low voltage Power Factor Correction complies with the following Standards: EEC 89/336 Standards (amended by EEC 92/31 – EMC) EEC 73/232 Standards (amended by EEC 96/3 – Low Voltage).

Documents
✚ TCC
✚ TCC - TECHNICAL SPECIFICATION

TECHNICAL DATA
Dielectric Metallized polypropylene film
Rated voltage 230 - 400 - 450 - 525 - 690 - 800 Vac
Rated frequency 50 Hz - 60 Hz
Power tolerance -5% + 10%
Dielectric losses < 0,20 W/KVAr
Working ambient temperature -25°C + 55°C (classe D)
Max over voltage 1,1 Un (according to IEC)
Max over current 1,3 In
Max inrush current 200 In
A.C. test voltage between terminals 2,15 Un for 10 sec.
A.C. test voltage between case/terminals 3 kV for 10 sec.
Discharge resistors Included
Internal connection Delta three-phase
Safety device Internal Overpressure disconnector
Terminals 6MA screw ( ø 55 - 65 mm)
Clamp ( ø 75-85-100-116-136 mm)
Fixing M12 stud
Filling dry type PCB free
Service type Continuous, indoor
Protection degree IP20
Discharge time < 3 minutes to 75V
Mounting position Vertical preferable for better cooling
Insulating level 3/15 kV
Permissible humidity 95%
Service life 100.000 operating hours
Reference standard CEI EN 60831-1/2 IEC 831-1/2
Approved file n. E163917
DIMENSION
iTopPlus867375207832
525 Vac -50 Hz Power Current Capacitance Diameter Height Weight Discharge time
(10% Un)
kvar (Vac-Hz) AµFD mmH mm kgsec.
TCC/S 01052 1 (525 -50) 1,1 3 x 3,8 55 165 0,5 15
TCC/S 01552 1,5 (525 -50) 1,6 3 x 5,8 55 165 0,5 25
TCC/S 02052 2 (525 -50) 2,2 3 x 7,7 55 165 0,5 30
TCC/S 02552 2,5 (525 -50) 2,7 3 x 9,6 55 165 0,5 40
TCC/S 0352 3 (525 -50) 3,3 3 x 11,5 65 205 0,7 15
TCC/S 04052 4 (525 -50) 4,4 3 x 15,4 65 205 0,7 20
TCC/S 05052 5 (525 -50) 5,5 3 x 19,2 65 205 0,7 25
TCC/S 07552 7,5 (525 -50) 8,2 3 x 28,9 75 210 1,2 25
TCC/S 10052 10 (525 -50) 11 3 x 38,5 85 210 1,6 35
TCC/S 12552 12,5 (525 -50) 13 3 x 48,1 85 210 1,6 45
TCC/S 15052 15 (525 -50) 16 3 x 57,7 100 210 2 50
TCC/S 20052 20 (525 -50) 22 3 x 77,0 100 210 2 70
TCC/S 25052 25 (525 -50) 27 3 x 96,2 116 210 2,6 85
TCC/S 30052 30 (525 -50) 33 3 x 115 116 210 2,6 100
TCC/S 40052 40 (525 -50) 44 3 x 154 136 210 3,2 135
TCC/S 50052 50 (525 -50) 55 3 x 193 136 260 5,5 170